8
Advanced Functions
.
Set TIME and DAY
- To adjust the unit's time press and hold the HOUR and
the MIN buttons together for three seconds (Refer to Figure 7).
The unit's current hour displays. Use the
or
buttons to adjust the
hour from 1 - 12, AM or PM. The example shown below is set for 11 AM.
Press TIMER SET (Refer to Figure 7) button to save the hour setting and
display the unit's current minutes.
Figure 7
FRR097
FRIEDRICH
AIR CONDITIONING CO.
SAN ANTONIO, TX
Use the
or
buttons to adjust the minutes. The example shown
below is now set for 11:25 AM. Press TIMER SET button to display the
unit's day setting.
Use the
or
buttons to adjust the day from 1 to 7, 1 = Sunday, 2
= Monday, 3 = Tuesday, and so on. The example shown below is set to
4 = Wednesday. Both pre-programmed schedules and customizable
schedules (discussed next) operate off of this setting. It is crucial to set
the day correctly if any schedule is to be used.
24-HOUR TIMER
The default program for your TIMER SCHEDULE
button is a 24-Hour
Timer. (scheduler options explained later in this section)
It allows you to set daily ON and OFF times. For example, you can program
the unit to turn ON at 8:15 am and turn OFF at 1:30 pm everyday. The start
and stop time can be defined, but the unit's system mode, fan speed and
set point cannot and will default to the last setting used.
In order to use advanced functions, such as the timer or scheduler, you
must first set the time and day on your unit.
25
FRR129
Press TIMER SET button to exit and save the SET TIME and DAY. The
TIMER SET button must be pressed within 15 seconds or the display will
time out and return to the normal operating display.
4
FRR130
AM
11
FRR128
Set Timer: Setting the Start Time
Press and hold the HOUR button (Figure 7) for 3 seconds. The
icon
and "ON" will appear on the display
Press the or
button to adjust the hour. Press the TIMER SET button
(Figure 7) to save hour setting and go to minutes. The example below is
showing a starting hour of 4 AM.
AM
4
ON
FRR141
21
ON
FRR142
Use the
or
button to adjust the minutes. Press the TIMER SET
button (Figure 7) within 15 seconds to exit and save the setting. The example
below has been set to turn on at 4:21 AM, once the Timer is activated..
The display will return to normal once the settings are saved.
NOTE: Setting the Timer's start and stop times do not activate the timer.
To activate the timer, you must press the
button.
