20
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
STEP 1.
Remove the decorative front cover. (See A thru D and Figures
22A and 22B below)
Cord Routing Change
Unplug unit.
A.
Open the decorative front cover.
B.
Locate and disconnect electronic control power cable harness.
C.
Remove 4 screws attaching decorative front cover.
Save to reinstall later..
D.
Remove decorative front cover. Store in a safe
place to reinstall later. (no image).
A.
B.
C.
Figure 22A
Figure 22B
