FRIEDLAND spectra 140 L210N BLK, Instruction Manual

Page: 6 / 84

●
Auto / Off Wiring in this manner
provides the following lighting options:
Automatic operation (Switch closed)
Permanently Off (Switch open)
Additional feature - when in Auto mode,
switching off, then back on, will result in
the lamp illuminating for the pre-set time
period. This is ideal for lighting the way
when leaving premises.
●
Auto / On Provides the following
lighting options:
Automatic operation (Switch open)
Permanently On (Switch closed)
WIRING &
3
CONNECTION
The unit requires connection to a 240Vac
50Hz mains electricity supply. This is best
achieved by connecting the unit to the
domestic lighting circuit. It is suggested that
3-core round flexible cable of at least
1mm
2 gauge is used. It is also allowable
for the unit to be connected to the
domestic socket ring main, though it
is suggested that a 5 amp fused spur is
used in this case.
NOTE: when connecting to METAL LIGHT
FITTINGS ensure an earth conductor is
connected to provide earth continuity to
the metal fitting.
IMPORTANT
ALWAYS switch OFF the mains power
BEFORE attempting to install or maintain
the PIR. If in doubt,
consult a qualified electrician.
All installations shall comply with
National Wiring Regulations.
Fig. 8
Fig. 9
L N L1
INDOOR SWITCH
FOR PERMANENT OFF
OVERRIDE
(OPTIONAL)
LAMP
LIVE
EARTH
NEUTRAL
Fig. 10
L N L1
INDOOR SWITCH
FOR PERMANENT ON
OVERRIDE (OPTIONAL)
LAMP
LIVE
EARTH
NEUTRAL
L
N L1
4
L210N 6017 ENG 1-10 8/15/06 10:09 AM Page 6