Fridge Electric ArticPro User Manual Download Page 10

10

11

mOUNTING ILLUSTRATIONS

Wall mounting

Correct bending

Wrong bending

51”

16”

OPERATION

Timer/Sleep Setting

Sleep setting

 

To automatically turn the unit OFF after a chosen length of time:

Press the Timer button when the unit is on. 

1. 

The LED [       ] will flash five times. Press the up or down button during this 

2. 

time or it will go back to displaying the temperature. 
Select the length of time you would like the air conditioner to run, anywhere  

3. 

between 0.5h to 24h. The time increases in half hour increments up to three 
hours and in 1 hour increments thereafter. Once the time is set, the number 
display will flash 5 times and then show the temperature again. The Timer 
symbol [      ] will stay lit indicating that the timer is set. Once the selected 
amount of time ends, the unit will turn off automatically.

Set Timer

To automatically turn the unit ON after a chosen length of time: 

First make sure the unit is set to the desired mode. To do this, press the power 

1. 

button [      ] to turn the unit on, press the Mode button [      ] to set the desired 
mode, set the desired fan speed if available [     ] (available in Cool mode 
or Fan mode) then press the Power button again to turn the unit off. 
While the unit is off, press the Timer button. Follow steps 2-3 as indicated 

2. 

above under “Sleep Setting.” Once the chosen amount of time ends, the unit 
will turn on automatically. 

Adjust/Cancel the Timer or Sleep Setting

When Timer is on (indicated by the illuminated timer symbol       ) you can 
check the remaining amount of time by pressing the Timer button. It will flash 
5 times. Press Up or Down button to adjust set time. The set time can also be 
cancelled if you press the Timer button once again while the time is flashing.

OPERATION CONTINUED on page 12

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

The LED [       ] will flash five times. Press the up or down button during this 

Mode

Summary of Contents for ArticPro











Reviews: