max 2500 mm
80 mm
140 mm
80 mm
400 mm
20 mm
20 mm
Wall mounting
Ceiling mounting
All models
SLS-R1: Heating
SL-R1: Heating/cooling
Flammable material
GB
7
Installation of SL/SLS - DC
Avoid installing the unit in proximity to:
-
positions subject to exposure to direct sunlight;
-
in proximity to sources of heat;
-
in damp areas or places with probable contact with water;
-
in places with oil fumes
-
places subject to high frequencies.
Make sure that:
-
the wall on which the unit is to be installed is strong enough to
support the weight;
- the part of the wall interested does not have pipes or electric
wires passing through;
-
the interested wall is perfectly flat;
-
there is an area free of obstacles which could interfere with the
inlet and outlet air flow
- in case of ceiling installation (SL) the airflow is not directed
towards persons.
The following descriptions of the various mounting phase and the
relative designs refer to a version of the machine with fixtures on
the left.
The operations for the mounting of machines with fixtures on the
right are exactly the same.
Only the images are to be considered as a mirror image.
To ensure that the installation is performed correctly and that the
appliance will perform perfectly carefully follow the instructions
indicated in this manual. Failure to respect the rules indicated
not only can cause malfunctions of the appliance but will also
invalidate the warranty and hence Frico shall not respond for any
damage to persons, animals or property.
Figure indicates the minimum mounting distances between the
wall-mounted cooler-convector and furniture present in the room.
Positioning the unit
Installation modes
Minimum installation distances
