A
B
C
D
GB
24
Routine maintenance is indispensable to keep the cooler-
convector in perfect working condition, safe and reliable over the
years. This can be done every six months for some interventions
and annually for others, by the Technical Service Assistance,
technically authorised and prepared, using always original spare
parts.
Before every cleaning and maintenance intervention,
disconnect the appliance from the mains by switching off the
master switch.
Wait until the parts have cooled down to avoid the risk of
burns.
Do not use abrasive sponges or abrasive or corrosive
detergents to avoid damaging the painted surfaces.
When necessary, clean the outer surfaces of the cooler-convector
with a soft cloth damp cloth.
-
extract the front grill by lifting it slightly and turn it until it comes
right out of its seat;
-
extract the filter, pulling it horizontally outwards.
Extraction of filter cells in the versions with aspiration grill with flaps
After a period of continuous operation and in consideration of the
concentration of impurities in the air, or when he intends to restart
the plant after a period of inactivity, proceed as described.
Maintenance
Cleaning the outside
Cleaning air suction filter
A
front grille
B
See grid
C
filter
D
extraction filter
