SIRe Competent Air Curtains Water
28
GB
Temperature settings
Fan control
Summer / Winter
Main menu
Fan control
System on/off
Installer menu
Main menu
Factory setting:
Room temp. day:
20 °C (5 – 35 °C)
Room temp. night:
18 °C (0 – 20 °C)
Fan control
Possibility of setting high speed mode and
what speed should apply with a closed door (3
or 5 steps depending on the unit).
Summer / winter
System on/off
Installer menu
Main menu
Enter password
0
0 0 0
(See manual)
Main menu > Installer menu
Summer / winter
•
Winter
> Installer menu > Summer / winter
Fan control
Summer / winter
System on /off
Main menu
Current settings
Temperature settings
Fan control
Main menu
Current settings
Room temp. day
20°C
Room temp. night
18°C
High speed limit
Step 5
Speed closed door
Step 1
Week program No program
Summer / Winter
Winter
Current settings
Temperature settings
Fan control
Main menu
Room temp. day
Room temp. night
Main menu>Temperature
settings
High speed limit
Speed closed door
Main menu>Fan control
High speed limit
•
Step 5
Main menu>Fan control
High speed limit
Speed closed door
Main menu>Fan control
Speed closed door
•
Step 1
Main menu>Fan control
Factory setting:
High speed limit: 3 resp. 5 (1-3, resp. 1-5)
Speed closed door: 1 (Off-3, resp. Off-4)
Summer / Winter
To permit or block heating. Heating is
permitted in winter mode. Summer mode is
displayed with a crossed out heating symbol
in the status window.
Factory setting:
Summer/Winter: Winter (Summer - heat off)
System on/off
Switch the whole unit off manually. In Off the
display goes out; as soon as a button is pushed
the display lights and shows System on/off. To
activate the unit again select On.
The unit’s safety functions are still active
when the system is switched off, which means
that the fan can continue to run for a moment
after mode Off has been selected.
Installer menu
The installer menu is at the bottom of the
main menu, this is password protected. See
Installer menu in this manual.
Main menu
Current settings
Displays set room temp, high speed limit,
Speed closed door, Summer / Winter and
week program status.
Temp. settings
Set the desired room temperatures to apply
for day respectively night mode, when the
door is closed (room temperature night is
used for week program/night reduction). At
open door these set point values automatically
increase with a set point differential that can
be set under
Installer menu > Heat settings>
Open door setp. diff.
(Factory setting 3.0 K).
