ADEA
25
GB
Settings menus
Desired values
Weekly programme
Heating regulation parameters
Fan parameters
Code
Measured value menu
Current values
Main menu
Menus
All functions in the regulator can be reached
through its menu structure. The regulator has
a main menu and a number of sub-menus. To
move forwards through the main menu, press
the SELECT button repeatedly.
The regulator returns to the measured value
menu after a short time. The measured value
menu shows the various current values such
as room temperature, outdoor temperature
etc. that are reached by simply pressing the
arrow keys without having to open the hatch.
There are five different settings menus:
desired values, weekly programme, heating
regulation parameters, fan parameters and
coded functions. Each menu has a header
display with an abbreviation of the menu
names. See the following pages for detailed
information on the measured value menu and
the settings menus.
Measured value menu
(See figure next page.) This menu is the
regulator’s main menu. You can read the
various measurement values here such as
room temperature, outdoor temperature etc.
You can also read and set the time, date and
year, and read input and output signals that
control the air curtains and the current week
number.
Press the arrow keys to move forwards
and backwards between displays in the
measurement value menu. To change a value,
e.g. the time, press the SET button and
then adjust using the arrow keys when the
value flashes. To change the next value in
the display (e.g. hour) press the SET button
again.
In the event of an alarm, the regulator
displays the Alarm menu (see below) and
shows ATT. To acknowledge the alarm, press
the SET button and change from ATT to 0
using one of the arrow keys. If, for example,
the TK contact is still broken, you cannot
acknowledge the alarm until the alarm
contact is made
