Frick Vyper 254, Installation Operation & Maintenance, Page: 62 / 68

VYPER ™ VARIABLE SPEED DRIVE
MAINTENANCE
100-200 IOM (FEB 09)
Page 62
PART DESCRIPTION FRICK PART #
U34 VSD LOGIC BD EPROM 60/50 HZ 639A0211H01*
U40 VSD LOGIC BD SERIAL PROM 639A0211H02*
U45 VSD LOGIC BD PROM (60 HZ) 639A0211H03*
U45 VSD LOGIC BD PROM (50 HZ) 649A0211H04*
U42 FILTER BD CONTROL EPROM (60 HZ) 649A0211H05*
U42 FILTER BD CONTROL EPROM (50 HZ) 639A0211H06*
U26 FILTER BD PROM 639A0211H07*
FRICK INTERFACE BOARD - (FIB) 639A0211H08*
VSD LOGIC BOARD 639A0211H09*
UPGRADE, FIB TO LOGIC BOARD (Board Only) Note: A 639A0211H10*
UPGRADE, FIB TO LOGIC BOARD (Board & Harness) Note: B 639A0211H67*
CIRCUIT BREAKER, 600 AMP, 100ka 639A0212H01
5 AMP CARTRIDGE FUSE (60 HZ) 639A0211H13*
6 AMP CARTRIDGE FUSE (50 HZ) 639A0211H14*
10 AMP CARTRIDGE FUSE 639A0211H15*
15 AMP CARTRIDGE FUSE 639A0211H16*
20 AMP CARTRIDGE FUSE 639A0211H17*
INPUT RECTIFIERS, (1, 2, & 3 PHASE) ONE EACH KIT 639A0212H02
VSD POWER MODULE 639A0212H03
VSD POWER MODULE CHILL PLATE 639A0212H04
VSD POWER MODULE (COMPLETE KIT) 639A0212H05
OUTPUT CURRENT TRANSFORMER 639A0212H06
AC LINE INDUCTOR 639A0212H07
BUS PLATE KIT 639A0212H08
VOLTAGE TRANSIENT BOARD 639A0211H25*
FUSES, VOLTAGE TRANSIENT BOARD 639A0212H26*
SCR TRIGGER BD (60 HZ) 639A0211H27*
SCR TRIGGER BD (50 HZ) 639A0211H28*
VSD DC BALANCING RESISTOR 639A0211H29*
COOLANT PUMP 639A0211H30*
BUS SNUBBER CAPACITOR 639A0211H31*
SNUBBER RESISTOR 639A0211H32*
SHELL & TUBE HEAT EXCHANGER 639A0211H33*
RELAY, CONTROL FAN/PUMP 639A0211H34*
GASKETS, HEAT EXCHANGER 639A0211H35*
COOLANT 639A0211H36*
INTERNAL CABINET FAN 639A0211H37*
SILCON PAD (THERMAL) 639A0211H38*
TRANSFORMER 24 VDC 639A0211H39*
CONTROL TRANSFORMER, 3KVA (60 KVA) 639A0211H40*
CONTROL TRANSFORMER, 3KVA (50 KVA) 639A0211H41*
BUS ISOLATOR BOARD 639A0211H42*
2-WAY ELECTRONIC VALVE, 1 1/2” (Valve Only) 639A0211H60*
3-WAY ELECTRONIC VALVE, 1 1/2” (Valve Only) 639A0211H61*
ACTUATOR, ELECTRONIC VALVE 639A0211H62*
KIT 2-WAY TO 3-WAY VALVE 639A0212H25
SNUBBER CAPACITOR 639A0211H64*
CHILL PLATE TEMP SENSOR 639A0211H65*
Contactor, 3-pole, 9 amp (Oil Pump/Blower Motor) 639A0211H68*
Oil Pump Starter, Overload 639A0211H69*
Blower Motor Starter, Overload 639A0211H70*
Blower Motor Aux. Contact 639A0211H71*
* Parts Also Used On 305HP Drives
1. Shaded rows are recommended spare parts.
Note: A - If the drive was manufactured after 02-08 or does not use the Frick Interface Board (FIB) replace logic
board with 639A0211H10.
Note: B - If drives uses the Frick interface board (obscolete) replace the Frick Interface and the Control logic Board
with 639A0211H67. This kit replaces both the FIB and logic Board.
437 HP SPARE PARTS lIST
1