15
button. Thus, the fusion process has been com-
pleted and the FRIAMAT
®
fusion unit is ready for
the next fusion.
4.
Settings
4.1
Description of the function buttons
The FRIAMAT
®
geo print fusion unit has 7 function
buttons.
MENUE:
The MENUE button is grey. It calls up the
main menu with its submenus “Basic settings”,
“Info” and “Emergency input”. In addition pressing
the MENUE button will clarify an error following an
error message.
START:
The START button is green. It starts up the
fusion process, selects submenus or individual
menus and saves settings. In addition this button
is used to confirm error messages/warning messa-
ges/hints in the display.
STOP:
The STOP button is red. It cancels the
fusion process, is used to close submenus or indivi-
dual menus and stops the entering process (without
saving data).
Arrow buttons:
The arrow buttons are blue. The
arrow buttons (up/down) are used to “browse”
through sub or individual menus. The arrow buttons
(left/right) are used to move the curser from left to
right and back when entering alphanumeric symbols
(e.g. emergency input, date). Use the arrow buttons
(up/down) to select the required symbol (letter, num-
ber, special symbol) at the appropriate place.
4.2
Menu “Basic settings”
Pressing the MENUE button will take you to the
main menu. Once there use the arrow buttons to
take you to the submenu “Basic settings” and select
this by pressing the START button. The submenu
“Basic settings” has the following individual menus:
• Documentation
• Time
• Date
• Language
• Volume
FM_2427_2_GB_03_12.qxp:- 28.03.2012 9:28 Uhr Seite 15
