11
2.4
Automatic activation of
“Service interval”
Starting with the first fusion process which you
perform with the FRIAMAT
®
fusion unit, the stored
service interval (see also Chapter 6.2) is auto
-
matically set to active (recommendation FRIATEC:
12 months).
IMPORTANT!
The leading service date is always shown on the
display and may deviate from the service label
attached to the FRIAMAT
®
fusion unit.
2.5
Transport/Storage/Despatch
Your FRIAMAT
®
fusion unit is delivered in an al u minium
transport box. Unpacking requires no spe cif ic skills,
nor does storage in the transport box. The tempe -
rature range during storage is -20°C.....+70°C.
WARNING!
Always transport/store inside aluminium trans-
port box.
2.6
Setting up/Connecting
Your FRIAMAT
®
fusion unit can be set up and oper -
ated outdoors if protected from rain and wet.
- Set up your FRIAMAT
®
fusion unit on level ground
(preferably horizontal).
- Ensure that generator is fused with a 16 A mini-
mum (slow acting) fuse.
- Plug unit connection cable into power socket.
- Use extension cable if necessary, ensure
sufficient cross section (see also Section 2.3
“Technical data”).
- Observe operating instructions of generator if
used.
WARNING!
Always roll out all cables before use!
FM_2427_2_GB_03_12.qxp:- 28.03.2012 9:28 Uhr Seite 11
