TG
EN
9 / 24
3.
INSTALLATION AND FIRST USE
All packing materials used for this unit are suited for recycling.
After unpacking, check the state of the unit. In case of damage, store the packing material, and
contact the transporter within fifteen working days after receiving the goods.
3.1
Unpacking the unit
Your unit is packed in a plastic container, protective corners and a carton box around it.
All units are placed on a wooden pallet. Around the box there are two tightening straps
.
1.
Cut the two transportation seals from both sides of the rotor.
2.
Remove all remaining packing materials from the unit.
3.
Take off the standard accessories.
3.2
Installation and positioning
WARNING
Electric chock
hazard
. Grounding instructions: only connect the appliance to an
alternating current provided by a grounded wall socket, with a mains voltage in
accordance with the information indicated on the data plate of the appliance.
It is the consumer's responsibility to make sure the electrical installation conforms
with current national and local codes and wiring regulations.
Do not use a multi plug or extension cord. Such can result in fire, electrical shock, or
other personal injury.
Failure to follow these instructions can result in death or serious injury.
WARNING
The outside of the unit can be very hot. The oven should not be accessible to the
customer.
WARNING
Position the unit on a flat and horizontal surface. A temporally inclined plane of
maximum 5° is allowed.
•
The user must have sufficient freedom of movement to properly operate the unit.
•
The minimum free distance must be at least 250
mm (10 inch).
•
During grilling, the glass panes will get very hot. While positioning, keep the unit out of
children’s reach.
•
The unit has a mains plug, and must be connected to a wall socket with the proper mains
voltage. The wall socket must be mounted by a certified electrician.