Fri-Jado Cold FS 100, User Manual

Page: 10 / 24

CC – Cold
US 10/24
3. INSTALLATION AND FIRST USE
All packing materials used for this unit are suited for recycling .
Before and during unpacking, check the state of the unit. In case of damage, store the packing
material, and contact the transporter within fifteen working days after receiving the goods.
3.1 Unpacking the unit
1. Unpack the unit as initiated on the unpacking instruction on the packaging.
2. Remove all remaining packing materials from the unit.
3. Remove the protective foil from the metal parts.
3.2 Installation and positioning
WARNING
Electric chock hazard . Grounding instructions: only connect the appliance to an
alternating current provided by a grounded hardwired supply, with a mains voltage in
accordance with the information indicated on the data plate of the appliance.
It is the consumer's responsibility to make sure the electrical installation conforms
with current national and local codes and wiring regulations.
Do not use a multi plug or extension cord. Such can result in fire, electrical shock, or
other personal injury.
Failure to follow these instructions can result in death or serious injury.
WARNING
Position the unit on a flat and horizontal surface. A temporally inclined plane of
maximum 5° is allowed.
Note: Refer also to Installation Instructions.
•
Place the unit level on a sufficiently sturdy floor.
•
Be sure that the personnel have sufficient room to work with the unit.
•
While positioning, keep the unit out of children’s reach.
•
The unit must be hard wired to the mains.
•
Do not position a unit near a doorway, a ventilation device or a refrigerator in order to avoid
any negative effects on the unit’s operation by a cold airflow. The unit is designed for a
maximum draft of 0.65 ft./sec.
•
Do not place into direct sunlight.
•
Be sure that the ambient temperature remains between 59ºF - 75ºF and that the relative air
humidity remains below 55%. These units have been designed to operate at climate class
Type I.
•
Keep the plinth free from any obstacles to ensure ventilation.
3.3 First use
Before starting to use the unit, clean the inside thoroughly with mild detergent and water.
After cleaning it wipe it with a cloth moistened with clean water to remove residual detergent, then
dry the entire unit.