Page 16
Service Manual Bake Star intelligent
PKII
form 9123665 rev. 06/2013
SERVICE PROCEDURES
WARNING:
Disconnect the electrical power to the machine
at the main circuit box. Place a tag on the circuit box indica-
ting the circuit is being serviced.
Adjustment of the door.
By means of the upper hinge it is possible
to “rotate” the door a few mm, through
which both catch forks can be adjusted in
height as it were.
The glass of the outside door is glued with
double sided tape, to the metal hinge.
Therefore it is not adjustable. For the
same reason, the glass can only be delive-
red as an assembly with the hinges.
The lower hinge is not adjustable. The cur-
rent hinges are locked with a M6 nut at
the bottom side.
It is however possible to put an extra washer
under the hinge, or remove one.
There is some margin on the holes in the
doorpost and the glass to make it possible
to align the catch forks. The screws of the
door handle go through these holes.
To prevent the bolts from the doorhandle
from coming loose, the spacers from the
handle are nowadays made out of solid
stainless steel and a thick washer is app-
lied under the bolthead.
At the same time the screw thread in the
handles is strenghtened.
The screws need to be fixed with thread loc-
ker, like Loctite 620
ADJUSTING THE DOOR
Summary of Contents for BS10i
Page 85: ...ELECTRICAL DIAGRAMS Page 85 Service Manual Bake Star intelligentPKII form 9123665 rev 06 2013...
Page 86: ...ELECTRICAL DIAGRAMS Page 86 Service Manual Bake Star intelligentPKII form 9123665 rev 06 2013...
Page 87: ...ELECTRICAL DIAGRAMS Page 87 Service Manual Bake Star intelligentPKII form 9123665 rev 06 2013...
