The linen locks are made of stainless steel and secured with an insert made of plastic against unintentional opening.
4
3. Target Group:
4. Technical Describtion:
Construction:
The RelaX is a paraglider that has been specially developed for powered gliding with trike.
The RelaX was tested for the German airworthiness LTF.
The RelaX is not approved for free flight.
The material is made of air-impermeable ripstop nylon fabric D 40.
In this sythetically produced fabric a reinforced thread network is woven. This prevents tearing and increases
the tensile strength.
The coating makes the fabric water repellent, UV resistant and impermeable to air.
The Relax consists of 54 cells. The wing end is pulled down and integrated seamlessly into the cap.
The ventilation of the cap takes place via openings on the underside of the profile nose.
The transverse ventilation takes place through exactly sized holes (cross ports) in the rib.
Each supporting profile rib is hung on 4 line connections.
Tension bands are sewn in between the main line groups, which regulate the sail tension.
In the profile nose reinforcements are sewn in, which ensure high dimensional stability and stability.
At the inflow and outflow edge a stretch-poor band is sewn in. This ensures a uniform distribution of
stress throughout the cap.
Suspension:
Depending on the installation location, the lines of the RelaX are made of polyester-coated HMA aramid
and polyester-coated PES / Dynema. The strengths of the individual lines depend on the installation location
and vary between 100 and 340 daN.
The lines in the paraglider are divided into gallery lines, fork lines, main lines, stabilizer lines and brake lines,
as well as the main brake line.
The suspension lines are divided into A, B, C and D levels.
The lines of each level are different in color for ease of control.
In order to halve the braking forces at higher suspension weights (MTOW), the brake line is equipped with a pulley.
But attention. This also doubles the brake length by 100%.
The individual lines are shown in the lines plan.
