Model CPCI32FF
32 Channel CPCI Board
User Manual
5
1784 Chessie Lane, Ottawa, Illinois 61350
•
Tel: 800/252-7074, 815/434-7800
•
FAX:815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
4.0 - Board Installation
CAUTION
CPCI32FF’s ARE SENSITIVE TO STATIC ELECTRICITY. USE PROPER GROUNDING TECHNIQUES
WHEN HANDING THE BOARD.
Frequency Devices' Model CPCI32FF mechanically conforms to the single width 6U CPCI form factor.
The CPCI32FF may be installed in any available CPCI slot except Slot 0. The board does not use CPCI
interrupts or bus mastering capabilities.
A major consideration when selecting a slot location for the CPCI32FF will be the EMI and I/O signal
cabling. To minimize interference from other boards in the system, it is good practice to keep one or more
empty slots between analog signal conditioning boards and high-speed digital boards. When cabling the
system, it is desirable to keep the analog signal cable as short as possible and physically located away
from high speed digital cables and high voltage switching lines.
5.0 - I/O Connections and the Front Panel
The following information is provided to assist the user when installing a CPCI32FF into a CPCI system.
5.1 - Front Panel Layout
The following sections provide detailed information about connectors, pin-out, and cabling. There are
no front panel indicators or controls on the CPCI32FF.
Figure 4
shows the layout of the front panel.
