Model CPCI32FF
32 Channel CPCI Board
User Manual
7
1784 Chessie Lane, Ottawa, Illinois 61350
•
Tel: 800/252-7074, 815/434-7800
•
FAX:815/434-8176
e-mail: [email protected]
•
Web Address: http://www.freqdev.com
5.2. - Input and Output Connector Configurations
The input connector on the board is a female 78 pin high-density D-sub connector. The output
connector is a male 78 pin high-density D-sub connector.
Input and output connectors have the
same pin out.
Known suppliers for a mating connector are Edac of Canada (633, 634 series),
Positronic (ODD series), and AMP. An exact mating connector cannot be recommended because of
the large variety of usable connector configuration details such as hoods, cable exit options, etc.
The pins identified
Low
on the input and output connectors, are tied to the analog common when the
single ended input or output option is selected.
CH #
PIN#
Channel 0 High
69
Channel 0 Low
70
Channel 1 High
50
Channel 1 Low
51
Channel 2 High
31
Channel 2 Low
32
Channel 3 High
11
Channel 3 Low
12
Channel 4 High
71
Channel 4 Low
72
Channel 5 High
52
Channel 5 Low
53
Channel 6 High
33
Channel 6 Low
34
Channel 7 High
13
Channel 7 Low
14
Channel 8 High
73
Channel 8 Low
74
Channel 9 High
54
Channel 9 Low
55
Channel 10 High
35
Channel 10 Low
36
Channel 11 High
15
Channel 11 Low
16
Channel 12 High
75
Channel 12 Low
76
Channel 13 High
56
Channel 13 Low
57
Channel 14 High
37
Channel 14 Low
38
Channel 15 High
17
Channel 15 Low
18
CH #
PIN#
Channel 16 High
61
Channel 16 Low
62
Channel 17 High
42
Channel 17 Low
43
Channel 18 High
23
Channel 18 Low
24
Channel 19 High
3
Channel 19 Low
4
Channel 20 High
63
Channel 20 Low
64
Channel 21 High
44
Channel 21 Low
45
Channel 22 High
25
Channel 22 Low
26
Channel 23 High
5
Channel 23 Low
6
Channel 24 High
65
Channel 24 Low
66
Channel 25 High
46
Channel 25 Low
47
Channel 26 High
27
Channel 26 Low
28
Channel 27 High
7
Channel 27 Low
8
Channel 28 High
67
Channel 28 Low
68
Channel 29 High
48
Channel 29 Low
49
Channel 30 High
29
Channel 30 Low
30
Channel 31 High
9
Channel 31 Low
10
Pins always available for shielding: 1, 2, 19, 20, 21, 22, 39, 40, 41, 58, 59, 60, 77 & 78.