freor PLUTON SPACE, Operation Manual

Page: 33 / 40

33
13. STORAGE
If a temporary storage and subsequent use of the semi verticals are foreseen
(during repair of the shopping premise or change of the cabinet operation place),
the equipment must be stored in a well-ventilated room with positive temperature.
It is forbidden to leave the cabinets outdoors. It is necessary to put on
transportation protections or to make other structures protecting the unit against
external damage. For protection against dust and debris, it is recommended to
cover the semi verticals with protective envelopes.
14. TRANSPORTATION
The semi verticals are transported partially dismounted: shelves, side parts and
partitions are packed separately. During transportation, all components must be
firmly fastened. Before mounting it is necessary to remove all transportation
fasteners, screws and packages. After transportation of the semi verticals to the
facility, carefully inspect the whole equipment and all its components. In the event
of violations, it is necessary to capture them (take pictures); it will help the
insurance company, the manufacturer and the customer to establish causes of the
violation.
15. TESTING
Each refrigerated cabinet is factory tested. During the testing, the following checks
are carried out:
• Hermetic tightness;
• Pressure tests of the freezing coil;
• Checks of electrical installation;
•
Load tests.
After the semi vertical is installed, each showcase and the overall system must be
inspected prior their start-up.
16. ACCESSORIES
The equipment is supplied with many special accessories, such as partitions, tabs,
price holders, drainage collection tub and evaporation baths, safety bumpers, etc.
For more information, please call FREOR LT or sales partner.