freor PLUTON SPACE, Operation Manual

Page: 11 / 40

11
1.8. Requirements for setting down of the semi vertical
When setting down the unit pay attention to the following issues:
• The unit must be aligned horizontally in all directions (depth, length) and
stably set down.
• At the place of the setting down, avoid draughts and higher heat. Do not set
down the equipment in front of heating radiators, heaters and near air outlets.
• Do not direct the heat sources or spot radiators (such as incandescent
lamps) to the unit. Any heat emitted to the unit increases operating costs and may
affect the power of the unit.
• Promotional posters that are only in the form of a thin film may be attached
to the semi vertical. Do not attach them on ventilation openings (air grids),
temperature indicators, safety instructions and performance data table.
Fig. 2 Unsuitable ambient conditions