31
Regular maintenance:
•
The semi verticals should be cleaned at least once a week. If needed,
when damaged packaging is detected, the cabinets have to be cleaned
more often.
•
During cleaning, the internal space, shelves, interior and exterior
plastic and glass parts of the semi vertical have to be thoroughly
cleaned as well as the floor at the semi vertical have to be washed.
•
Washing of the plastic parts has to be performed using warm water
and a non-abrasive cleaning agent purposed for plastics.
•
Metal components have to be cleaned using warm water and a non-
aggressive, corrosion-free cleaning agent. After washing, it is
necessary to remove any moisture residue and to dry up the surface.
Chromed surfaces have to be cleaned with special cleaning agents.
After cleaning, they have to be dried up with a soft cloth that does not
leave dust (linen, chamois and cotton).
•
Dyed components must be cleaned with liquid cleaning agents without
abrasive materials. It is recommended to use special detergents
purposed for dyed surfaces. After washing the surfaces must be well
dried up. The paint damage can cause metal corrosion at the scratch
place.
•
Glass parts can be washed using the household window cleaning
agents.
•
Some units of the furniture are with wooden finish. Wood and surfaces
of wooden products have to be cleaned dry; also, wood polishers can
be used. If necessary, surfaces can be cleaned with a damp cloth and
then dried thoroughly.
•
During cleaning, moisture cannot get on electrical installations.
•
It is necessary to check regularly drainage openings.
Sanitary day
General cleaning of the refrigerated furniture has to be performed once in every 4
weeks. The semi vertical has to be cleaned and disinfected in order to eliminate
pathogenic microorganisms.
•
Make sure that defrosting is in progress.
•
Remove the products from the semi vertical and temporarily place
them in the freezer compartment.
•
Disconnect electrical installations.
•
Remove the bottom shelves, air circulation grids and evaporator
covers.
•
Clean the ventilator of semi vertical from the plaque. Clean foreign
bodies from the structures of the evaporator and ventilators.
Summary of Contents for PLUTON SPACE
