DEMO9S08QE8 User Manual
11
Section 8 - DEMO9S08QE8 CODE DEVELOPMENT SOFTWARE
for more
information.
4.3
Run Mode
The DEMO9S08QE8’s rich component list empowers it to perform a variety of
tasks. Once an application is developed, debugged, and programmed
properly into the QE8 internal flash memory, it can run with or without
connecting to a host.
4.4
External BDM Mode
The DEMO9S08QE8 has an optional BDM header for debugging and
programming the on-board QE8 device using an external BDM hardware tool,
such as P&E’s USB Multilink or Cyclone PRO. Please refer to
Section 9 -
TRANSITIONING TO YOUR OWN TARGET
for more information. A user can
take advantage of this mode to develop a target-specific QE8 system and
compare it with the DEMO9S08QE8 when necessary.
5
DEMOQE TOOLKIT PC APPLICATIONS
P&E provides several Windows PC-based applications which work with the
DEMO9S08QE8 board. These applications are collectively referred to as the
DEMOQE Toolkit. The following applications are included in the toolkit:
5.1
DEMOQE Logic Analyzer Application
The DEMOQE board has a built-in two-channel logic analyzer. This analyzer
allows the IN0 and IN1 signals to be captured by the PC and displayed for the
user. The IN0 and IN1 signals may be connected to any of the MCU signals
which the user would like to view. By default, they are connected to the PTC0
and PTC1 pins of the MCU by jumper J11. At the time of this release, the logic
analyzer runs at a capture rate of 10khz.
