12
DEMO9S08QE8 User Manual
Figure 5-1: Logic Analyzer Application
This PC-based application is used to display the logic analyzer data on the
PC. The logic analyzer data is displayed in real-time and each waveform may
be paused, zoomed, and printed.
If the microcontroller-based Quick Start Application is programmed into the
MCU, the IN0 channel will show the PWM output on pin PTC0 whose duty
cycle is controlled by the potentiometer (W1). The IN1 channel shows the
PWM output on channel PTC1 which drivers the buzzer.
This PC-based application is included on the CD-ROM that accompanys the
DEMOQE, and may also be found at:
http://www.pemicro.com/fixedlinks/demoQEtoolkit.html.
5.2
DEMOQE Terminal Application
This PC-based application acts as a standard serial port terminal application
on the PC. It works with standard serial ports as well as the virtual serial port
on the DEMOQE board. The application includes settings to adjust the COM
port number, baud rate, parity, and number of data bits. There is a button to
take a file on the PC and transmit it out of the serial port. There are also
delays which are automatically inserted in the transmission output to prevent
overruns. It is recommended that these defaults not be changed.
