High voltage warning
A high voltage warning is indicated by all LEDs on, and the green LEDs
flashing. This occurs when the battery voltage level has risen above the
high voltage warning set-point.
Low voltage warning
A low voltage warning is indicated with the left-most LED flashing. This
occurs when the battery voltage level has decreased below its low voltage
warning set-point.
9
The horn
The horn button is located above the power button. Press the horn button
to sound the horn. The horn will sound for as long as the horn button is
pressed.
Cut-off voltage
When the battery voltage decreases below the battery cut-off voltage:
Sleep Model
When your wheelchair has been idle for 5 minutes or more, it will
automatically go into sleep mode to conserve battery charge. The system
can be woken from sleep mode by pressing the Power button, or, if
enabled, by deflecting the joystick - see Enable Joystick Wakeup.
IV. FR-W04 FEATURE GUIDE
Note: Please find a safe place to stop and the device should be switched off.
Note:
Need to immediately charge your device!
The status indicator will flash ( Flash code 2).
The first (red) LED will flash on the battery gauge.
The horn will sound once every 10 seconds.
Charge your wheelchair batteries for at least 3 to 4 hours prior to using it for the first time.
Keep the batteries fully charged to keep your wheelchair running smoothly.
BATTERIES AND CHARGING
Your wheelchair requires a Lithium battery pack, deep-cycle batteries that are sealed and
maintenance free. They are recharged by the supplied off-board charging system.
