16
HOW TO USE A 1 STEP CALORIE WORKOUT
1. Insert the key into the console.
See step 1 on page 14.
2. Select a 1 step calorie workout.
To select a 1 step calorie workout, press one of the
1 Step Calorie Workouts buttons until the name of
the desired workout appears in the display and the
light at the bottom of the desired trail lights up.
When a workout is selected, the display will show a
trail on the side of a mountain.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting
and/or incline setting may be programmed for con-
secutive segments.
3. Start the walking belt.
Press the Start button to start the workout. A mo-
ment after you press the button, the incline trainer
will begin to move. Hold the handrails and begin
walking.
At the end of the first segment of the workout, a se-
ries of tones will sound. If a different speed and/or
incline setting is programmed for the second seg-
ment, the speed setting and/or incline setting will
appear in the display for a moment to alert you and
the incline trainer will automatically adjust to the
speed and incline settings for the next segment.
The workout will continue in this way until you
reach the end of the trail on the display. The walk-
ing belt will then slow to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can override
the setting by pressing the Speed or Incline but-
tons;
however, when the next segment begins,
the incline trainer will automatically adjust to
the speed and incline settings for the next seg-
ment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
incline trainer will automatically adjust to the speed
and incline settings for the next segment.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that
you burn will depend on your weight. In addi-
tion, if you manually change the speed or in-
cline of the incline trainer during the workout,
the number of calories you burn will be af-
fected.
4. Monitor your progress with the display.
See step 5 on page 15. When a 1 step calorie
workout is selected, the console offers four display
modes. Press the Display Mode button repeatedly
to select the desired display mode.
The display will show an
animation of the trail you
are walking or running.
The circle above the trail
will show your progress.
Press the Display Zoom
increase and decrease
buttons to zoom in or zoom out. In the display that
shows an animation of a runner, the incline profile
represents the incline level of the trail and the right
side of the display will show the number of vertical
feet you have climbed.
To adjust the contrast of the display, see THE IN-
FORMATION MODE on page 19.
5. Measure your heart rate if desired.
See step 6 on page 15.
6. Turn on the fan if desired.
See step 7 on page 15.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 15.