10
7. Have a second person hold the Console (84)
near the Yoke (88). Connect the Upright Wire
(72), the Left and Right Pulse Wires (70, 71),
and the Console Ground Wire (89) to the wires
extending from the Console.
See the inset
drawing. The connectors should slide to-
gether easily and snap into place.
If they do
not, turn one connector and try again.
IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Insert the excess wire into the Console (84).
7
84
89
71
72
70
72
8. Attach the Console (84) to the plate on the Yoke
(88) with four #8 x 3/4" Screws (1).
Be careful
not to pinch any wires. Start all four Screws
before tightening any of them. Do not over-
tighten the Screws.
8
1
1
88
84
88
Console
Wires
Console Wire
