9
51
61
61
57
51
51
149
2
2.
Partially tighten four 5/16" x 3/4" Screws (51)
with three 5/16" Star Washers (61) into the Left
Upright (149) as shown;
do not fully tighten the
Screws yet.
3
150
129
56
116
3.
With the help of a second person, slide the Right
Upright (150) onto the Base Frame (56).
Have
the second person hold the Right Upright
as you connect the Upright Wire Harness (116)
to the Frame Wire Harness (129).
See the
inset drawing. The connectors should slide
together easily and snap into place.
If they
do not, turn one connector and then try again.
IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Then, insert the Wire Harnesses (116, 129)
into the Base Frame (56) as you slide the
Right Upright (150) down.
Do not pinch the
Upright Wire Harness (116) or the Frame Wire
Harness (129).
129
116
