9
4
4. Insert the Weight Cable (40) through the Tower
Frame (1) as shown.
Attach the lower end of the Upright (72) to the
lower end of the Tower Frame (1) with four M10
x 35mm Socket Patch Screws (76) and four
M10 Washers (31).
See step 3.
Tighten the two M10 x 30mm
Socket Patch Screws (30).
1
72
31
40
31
76
76
5
5. Route the Weight Cable (40) upward through
the Small Pulley Bracket (6).
Attach the Large Pulley (24) inside the Small
Pulley Bracket (6) with the M10 x 50mm Socket
Bolt (29), the two M10 Washers (31), and the
M10 Locknut (32) that you removed in step 2.
Then, attach the Small Pulley Bracket (6) to the
Tower Frame (1) with the two M10 x 30mm
Socket Patch Screws (30) and the two M10
Washers (31) that you removed in step 2.
31
31
31
29
6
1
30
24
40
32
Summary of Contents for FLY/REAR DELT F806.0
Page 24: ...24 NOTES...
