10
7
7. Loosen the two M8 x 35mm Set Screws (19) a
few complete turns; it is not necessary to
remove the Set Screws.
Look under the top of the Tower Frame (1) and
remove the two 25mm Snap Rings (39) from
the two Weight Guide Bushings (18).
Lift the Weight Guide Bushings (18) until the
upper ends of the Weight Guides (7) are free.
Next, tip the upper ends of the Weight Guides
(7) forward or backward, and slide the two
25mm Snap Rings (39), the Drop-down Weight
(10), the two Upper Weight Bumpers (16), and
the Top Weight (9) upward off the Weight
Guides.
10
16
9
19 18
18
19
7
1
6
6. Identify the Rear Shroud Base (3), which has a
hole in the center, and the Front Shroud Base
(4). Orient the Shroud Bases as shown.
Insert the end of the Weight Cable (40) upward
through the Rear Shroud Base (3).
Attach the Shroud Bases (3, 4) to the Tower
Frame (1) with four M6 x 15mm Button Screws
(35) and four M6 Washers (34).
4
1
3
40
34
35
34
35
39
16
Summary of Contents for FLY/REAR DELT F806.0
Page 24: ...24 NOTES...
