Freemotion 283590 R0809A, User Manual, Page: 7 / 10

14 7
HOW TO CONNECT AN EXTERNAL
SOURCE USING A CATV CABLE
Use a CATV cable to connect to an external
source such as a cable box, analog cable,
satellite TV box, or VCR.
1. Connect one end of a 75 ohm CATV
cable to the 75 ohm output jack on your
external source.
2. Plug in the power cord of your external
source. See your external source userʼs
manual for proper grounding instructions.
3. Connect the
75 ohm
CATV cable
to the 75
ohm termi-
nal on the
frame of the
exercise
equipment near the floor.
HOW TO CONNECT AN EXTERNAL
SOURCE USING AN RCA COMPONENT
VIDEO CABLE
Use an RCA component video cable to con-
nect to an external source such as a VCR or
DVD player.
Note: Not all models have this feature.
1. Connect the three-pronged end of the
RCA component video cable to your
external source.
2. Plug in the power cord of your external
source. See your external source userʼs
manual for proper grounding instructions.
3. Connect the RCA component video
cable to the audio/video input jack on the
frame of the exercise equipment near
the floor.
Highlight START TO SCAN and press
the Volume increase button to start the
auto scan. The television will begin scan-
ning all of the channels available in your
area. When no signal is detected on a
channel, the channel will be skipped.
When a signal is detected, the channel
will be saved into memory and the next
channel will be selected. This process
will continue until the highest channel
number is reached. The television will
renumber the channels in the order in
which it locates them. Note: If a televi-
sion channel disappears, scan for
channels again.
After all valid channels available in your
area have been saved into the televi-
sionʼs memory, you can manually skip
unwanted channels.
To skip a
channel,
highlight
CHANNEL
SKIP and
press the
Volume
increase
button on
your remote control. In the channel skip
submenu, press the Channel increase
and decrease buttons to highlight the
desired channel and the Volume
increase and decrease buttons to turn on
or turn off the skip option. Continue this
process until you have skipped all
unwanted channels.
To change
the display
name of a
channel,
highlight
CHANNEL
NO. and
select a
channel.
Then, highlight CHANNEL LABEL and
press the Volume increase button to
enter the channel label submenu.
Press the Volume increase and decrease
buttons to select a number or letter box.
Then press the Channel increase and
decrease buttons to select the desired
number or letter.
7. Exit the Menu.
When you have finished adjusting the
settings, press the Exit button.
No.
"MENU":EXIT "ENTER": SELECT
Program Name Skip
4-1 FD 3803 Off
9-2 KQUED-SD Off
EDIT SELECT "MENU": EXIT
F D 3 8 3 0
75 Ohm Terminal
75 Ohm CATV Cable