11
10
HOW TO USE THE REMOTE CONTROL
The first time you use
the remote control,
insert batteries (see
HOW TO REPLACE
THE BATTERIES IN
THE REMOTE CON-
TROL on page 11).
Hold the remote con-
trol near the television.
Point the remote con-
trol directly at the
television.
Press the Power button ( ). After a few
moments, the television will turn on or turn
off.
Press the Volume (VOL) increase or
decrease button to navigate left or right in a
menu.
For best results, change the volume level by
pressing the Volume buttons on the console
only.
Press the Mute button to turn on or turn off
the sound.
Press the numbered channel buttons or the
Channel (CH) increase or decrease button to
select a channel. The Channel increase and
decrease buttons on the remote also func-
tion as the up and down navigation buttons
in a menu.
Press the Return button ( ) to view the pre-
vious channel.
To select a subchannel, select a channel,
press the Subchannel button ( ), and then
press the numbered channel buttons.
Press the Menu button to view the main
menu or to view a previous menu. See page
12 for information about the menu.
Press the Exit button to exit any menu.
Press the PRLIST button to view a list of
channels. If you have labeled any channels,
the menu will also show the channel label.
See page 14 for information about labeling
channels.
Press the EPG button to view the electronic
program guide. Note: The electronic program
guide is available only when viewing ATSC
digital television.
Press the Info button to view information
about the current program and the broadcast
or cable signal.
Press the CC button repeatedly to turn on or
turn off closed captioning. See step 5 on
page 13 to adjust closed captioning settings.
Press the TV/AV button repeatedly to select
the input source. To view television channels
through an antenna or a CATV cable, select
the TV source. To use an RCA component
video cable, select the AV source.
Press the MTS button repeatedly to select
mono, stereo, or SAP (secondary audio pro-
gramming) as the audio format.
Press the Format button repeatedly to select
auto, 4:3, or wide image as the display for-
mat. Note: The auto display format is
available only when viewing ATSC digital tel-
evision.
Press the Pict button repeatedly to select
standard, dynamic, soft, or personal as the
image setting.
Press the Audio button repeatedly to select
standard, music, movie, or personal as the
audio setting.
HOW TO REPLACE THE BATTERIES IN
THE REMOTE CONTROL
To replace the
batteries, first
locate the bat-
tery cover on
the back of the
remote control.
Push down
lightly on the
battery cover
with your thumb and slide off the battery
cover.
Remove the old batteries from the remote
control. Insert two new AAA batteries.
Make
sure to insert the batteries as shown in
the drawing
. Then, slide the battery cover
onto the remote control.