MODEL: P30LMTI
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
07
MODEL: P30LMTI
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
06
1. Select the appropriate inflation tip and twist onto
the inflator air chuck.
6. Unscrew the inflator chuck from the tire valve
stem. Put back the dust cap and unplug the power
cord from the socket.
INFLATING OTHER OBJECTS
2. Make sure the inflator is OFF (O), and then
connect the power cord with a 12V DC power
outlet.
3. Switch the inflator to ON (-) position and begin
inflating the object.
4. When the pressure gauge indicts the desired
pressure, turn off the inflator by switching to OFF
(O) position. Do not over inflate.
MAINTENANCE
WARNING:
Any time inspection, maintenance, and
cleaning are done be sure to remove the
tool from the power source.
REPLACING THE FUSE
1. Unscrew the tip of the power cord plug.
2. Remove the blown fuse and replace with a new
15A fuse.
3. Screw back the tip of the power cord plug.
CLEANING
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and maybe damaged
by their use. Use clean cloths to remove dirt, dust , oil,
grease, etc.
