RECORD TYPE:
Change the shutter/record output on the MōVI Controller Receiver.
MOMENTARY:
TOGGLE:
The Shutter/Record Output is active only while the Record Start/Stop Button is pressed.
The Shutter/Record Output switches between active and inactive each time the Record Start/Stop Button is pressed.
RECORD POLARITY:
Change the active state of the Shutter/Record Output signal from the MōVI Controller Receiver.
NORMAL:
REVERSE:
The Shutter/Record Output is active low (0.0V digital output).
TILT REV Function:
Configure the function of the TILT REV switch center position:
NORMAL:
REVERSE:
USER 3 Function:
Assign a function to the User 3 switch. See User Functions table below.
USER 1 Function:
Assign a function to the USER 1 knob. See User Functions table below. The USER 1 function assignment has
priority over USER 2 and USER 3.
USER 2 Function:
Assign a function to the USER 2 knob. See User Functions table below. The USER 2 function assignment
has priority over USER 3.
The Center position is the same as the Up position (TILT FWD).
The Center position disables the Tilt Axis.
The Shutter/Record Output is active high (3.3V digital output).
Summary of Contents for MoVI
Page 1: ...USER GUIDE ...
Page 30: ......
