Freefly ALTA X, User Manual

Page: 67 / 67

2.
Place your batteries on the tray and secure them with the four battery straps.
See the Appendix for minimum battery requirements.
Fly
1. Ensure you have completed the necessary preflight checks for ALTA X
2.
Turn on your transmitter
Review the transmitter integration section of this manual for a step by step guide
to installing your transmitter if this has not been done
3.
Plug the batteries into ALTA X using the built-in battery leads.
Only power ALTA X with batteries when intending to fly; make sure you are in a
safe takeoff location and adhering to your regions UAV regulations.
4.
Once the batteries are plugged into ALTA X and you are in a safe takeoff location arm
ALTA X by holding full low throttle and full right yaw. Once armed the all motors will
spin up.
5.
After ALTA X is armed you may takeoff and use
We recommend quickly checking ALTA X’s orientation before takeoff by giving
small roll/pitch inputs.
Ensure you are monitoring ALTA X’s voltage during flight to prevent low battery
situations.
6.
Once the flight is complete, return to a safe location to land ALTA X. After landing
disarm ALTA X by holding minimum throttle and full left yaw.
7. Unplug the batteries after disarming ALTA X and then turn off the remote controller.
8.
Detailed procedural steps can be found in the ‘Procedures ’ section of this manual;
ensure that you have reviewed and understand each step before flying.