ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev G
FFS Copyright © 2016 All rights reserved.
3-23
3.5.2 Terminal Maintenance Commands
The available maintenance commands are summarized in the table below:
Command
Description
ads
Display data from the altitude/air data input
bit
Display built-in test status
clear
Clear the terminal screen
comm
Display communication ports’ status - continuous
control
Display control squawk and mode status
cnfg
Display configuration data
gps
Display data from the GPS input
help or ?
Display command help
info
Display info – S/N, operation hours, versions, etc.
Reset
Reset and restart the unit
resetpw
Disable MPI access password (See Section 3.5.3)
rxstatus
Display receiver status info – continuous
set <item> <value>
Set a configuration item’s value
setpw
Set MPI access password (See Section 3.5.3)
stop
Stop continuous data outputs
cnfg defaults
Reset configuration to defaults
3.5.2.1 “help or ?” Command
This command displays a list of available commands as shown below:
