ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev G
3-48
FFS Copyright © 2016 All rights reserved.
3.6.2.11
ARINC IN Channel X Data Type
(X = channel number) The FDL-978-XVR can receive data via two ARINC 429 input channels.
The following options are offered for selecting ARINC 429 input type for each individual channel
of the FDL-978-XVR:
Not Used
GPS
Air Data Computer
AHRS
ADC+AHRS
Txpdr Control
Other 1
Other 2
Refer to Section 3.3.2.3 for information on selecting ARINC input settings.
The display screen is as shown below with one of the options from the list above.
Rotate the CODE knob either clockwise or counterclockwise to display the options above and
select the correct ARINC input type. Once selected, press the ENT button to confirm your
selection and move to the next configuration item in the setup mode.
If “Not Used” is selected then the ARINC input line speed configuration mode will
not be displayed and the next configuration mode item will be displayed.
3.6.2.12
ARINC IN Channel X Interface Speed
(X = channel number) The following options are offered for selecting the ARINC interface speed
for each channel data type:
Low
High
The display screen is as shown below with one of the options from the list above.
Rotate the CODE knob either clockwise or counterclockwise to display the options above and
select the correct ARINC input interface speed. Once selected, press the ENT button to confirm
your selection and move to the next configuration item in the setup mode.
