ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev G
FFS Copyright © 2016 All rights reserved.
3-21
3.5.1.1 MPI Serial Connection Settings
The default MPI port settings for a serial connection are shown in the table below. These
settings applicable to all MPI devices (USB-to-Serial, MPI Module, and Aircraft Wi-Fi Module)
Table 23. Default MPI Port Configuration Settings
MPI Port
Baud
Parity
Data
Stop
Flow
Control
3
38400
Odd*
8 bit
1 bit
None
5
115200
None
*Odd parity is only required if Port 3 is configured to TMAP at 38400 baud. If the port has
changed from either of these default settings, Parity should be set to “None”.
Figure 15 . Tera Term Serial Port Setup
3.5.1.2 Terminal MPI Wi-Fi Connection Settings
A Wi-Fi connection to the Wi-Fi Module SSID must first be made on the PC or Android tablet
running the ADS-B MPI app (See Section 3.4). The typical “Tera Term” TCP settings for the Wi-
Fi connection are:
Table 24. Tera Term Wi-Fi Connection Settings
Setting
MPI Module
FWF-125
(Aircraft Wi-Fi Module)
Host
192.168.10.1
192.168.5.1
TCP Port
44000
4000
Service
Other
Protocol
UNSPEC
