ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev G
FFS Copyright © 2016 All rights reserved.
3-49
3.6.2.13
ARINC OUT Chan 1 Data Type
The FDL-978-XVR can transmit data via an ARINC 429 output channel. The following options are
offered for selecting ARINC 429 output type:
Not Used
GPS
Traffic
Refer to Section 3.3.2.4 for information on selecting ARINC output settings.
The display screen is as shown below with one of the options from the list above.
Rotate the CODE knob either clockwise or counterclockwise to display the options above and
select the correct ARINC output type. Once selected, press the ENT button to confirm your
selection and move to the next configuration item in the setup mode.
If “Not Used” is selected then the ARINC output line speed configuration mode is
not displayed and the next configuration mode item is displayed.
3.6.2.14
ARINC OUT Chan 1 Interface Speed
The following options are offered for selecting the ARINC output interface speed:
Low
High
The display screen is as shown below with one of the options from the list above.
Rotate the CODE knob either clockwise or counterclockwise to display the options above and
select the correct ARINC output interface speed. Once selected, press the ENT button to
confirm your selection and move to the next configuration item in the setup mode.
