v3.2-F6
FreedomAlert
®
15
9. Slide switch back to Friends & 911, Friends Only or 911 Only
10. Programming complete!
DO NOT program 911 as a “Friends” Number – use the pro-
gramming switch to select F 911 or 911 only.
Programming Special Features
There are a few features you can program into the System. A typical user
will not need these features - and may skip to the next page. If you choose
to change any of these features - use the same programming set-up as before
- i.e. first establish a phone connection with another phone such as. your cell
phone. Then slide the switch at the back of the Base to “Learn Mode” - then
use these directions for any option you choose to change:
Option #1 – Dial 9 Before Number
(important if your phone system requires
a 9 before getting an outside line - particularly when it calls 911)
1. Enter
1234
**
[Voice prompt – Option Mode]
2. Enter –
1
[Voice prompt – Dial 9 before number, 1 for YES – 3 for NO
3. Enter either
1
or
3
[Voice prompt 1 – YES]
or, [Voice prompt 3 – NO] – FACTORY SETTING
4. Enter
#
(to exit programming mode) Voice prompt – Programming
complete]
5. Slide Programming Switch to “Friend, 911 – Friends Only – 911 Only”
Option #3 - Dial *82
When this option is set, the unit will dial *82 before
dialing any number stored in memory. This option is used to UNBLOCK
and send the caller id information before the Friends or Emergency number
is dialed.
1. Enter
1234
**
[Voice prompt – Option Mode]
2. Enter –
3
[Voice prompt – Dial *82 before number, 1 for YES – 3 for
NO
3. Enter either
1
or
3
[Voice prompt 1 – YES]
or, [Voice prompt 3 – NO] – FACTORY SETTING
4. Enter
#
(to exit programming mode) Voice prompt – Programming
complete]
5. Slide Programming Switch to “Friend, 911 – Friends Only – 911 Only”
