v3.2-F6
FreedomAlert
®
11
How to Handle DSL:
If your home has DSL
service for your computer, you will need to
use a DSL filter in line with the FreedomAlert
OR IT WILL NOT WORK. This filter can
be obtained from a local electronics supplier
or your DSL service provider. See image to
the right.
Locating the Base Unit:
For best results and longest range, locate the Base
unit in an area away from household appliances which could present electri-
cal interference. These include microwave ovens, refrigerators, televisions,
electric mixers or blenders, hair dryers, wifi routers or other cordless phones.
Do not place on a metal surface.
If more than one FreedomAlert is to be used in one home, it is recommended
that the Base units be located at least 10’ apart.
Base Unit Options and Features:
The FreedomAlert can work right out of the box with no programming. To
avoid programming any telephone numbers, simply slide the slide switch
at the back of the Base unit to the “
911 Only
” mode. Then, when you push
the blue button on the Pendant - you will be immediately connected to 911
emergency services.
Note: If no Friend’s list phone numbers are entered
or a mistake was made while programming the Freedom Alert, it will
automatically default to 911 for each of the 3 slide switch settings.
If you choose not to program any Friends numbers, simply skip these next
steps on Programming Telephone Numbers and jump to page 15.
Friend’s List and Emergency Operator.
In addition to being able to call 911, you can also program up to 4 telephone
