1
|
P a g e
Freedom
Personal
Safety.
Thank you for purchasing the Freedom Personal Safety. Before we begin the
installation lets take a look at the Freedom Personal Safety GPS unit.
1) Power Button – You will need to leave the Freedom Personal Safety GPS unit
on continuously. The Freedom Personal Safety GPS unit can be left on
continuously for up to 12 hours before you will need to recharge it.
2) Alert Button – Slide the switch and push it down to activate your alert
button. Once the button is pressed the Freedom Personal Safety GPS unit will
send a signal to your phone which will then send your location and message to
your pre‐selected contacts.
3) Mini USB charging port – Insert the Mini USB cable from your car, wall or PC
charging cable here to charge the Freedom Personal Safety GPS unit. To
recharge fully from flat will take around 2‐3 hours.
4) Bluetooth LED (Blue):
•
On solid – Ready for connection
•
Flashing (with GPS signal LED on solid or flashing) – connected.
•
Flashing (with No GPS signal LED on) – GPS in power saving
mode.
5) GPS signal LED (Orange):
•
On solid – No GPS lock, acquiring satellites.
•
Flashing – GPS lock acquired.
•
Off – GPS in power saving mode.
6) Alert Button LED (Red):
•
Flashes when alert button is pressed.
7) Power Indicator (Red or Green):
•
Off – Power levels normal.
•
Flashing Red – GPS unit needs charging.
•
Flashing Green – Charging.
•
Solid Green – Fully Charged.
.
