26
Adjustments
Anti-tip Lever Adjustment
1. Remove the screw, nut and washers that
attach the roller assembly to the lever.
2. Align holes in roller assembly with holes in
lever at desired height (recommended at
38.1mm (1-1/2”) to 50.8mm (2”) off of the
ground).
3. Re-install screw, washers and nut—tighten
securely.
Warning:
Under normal use, anti-tip devices will
prevent the wheelchair from tipping over
backward. Anti-tip devices are to stay on
the chair in the lowered position, at all times
when in use and should not be altered or
disabled.
Tilting the Freedom
CGX
™
With the chair on a level surface:
1. Set the wheel locks.
2. Hold the handgrips with both hands.
3. Press down and hold the foot tilt lever with
your right foot.
4. Push the back handles forward for less tilt
or pull rearward for greater posterior tilt.
5. When the desired tilt is achieved, lift up on
your foot to engage the tilt lock mechanism.
6. Set the lockout for the foot tilt lever after the
desired tilt angle has been achieved.
Warning:
The locking pin must be installed whenever
the chair is in motion.
!
!
!
!
Summary of Contents for CGX Extra Wide
Page 2: ......
Page 36: ...User Guide 11 5 2010 Part No 1536525 Issue 05...
