27
Adjustments
Changing Frame and Seat Width
The seat and frame can be widened in
25.4mm (1”) increments. The frame can be
widened independently to allow for additional
lateral stability.
To widen the frame:
Remove the screws (x 6) located at the lower
arrows (shown at left) under the frame cross
members on each side. Slide the frame out to
desired width. Align holes in cross members
with holes in telescoping frame tubes. Re-install
the screws and tighten securely.
To widen the seat and back:
Remove the (x 4) screws at the two (2) center
arrows on underside of each side of the seat
and the one (1) screw on the back spreader
bar at the top arrow (shown at right). Slide the
frames out to desired width, align holes and
re-install screws. Tighten securely.
Cleaning
It is important for optimum performance to clean and maintain your
CGX
™. We
recommend that the frame finish be cleaned with mild soap and water.
In order to operate the
CGX
™ properly and safely, routine maintenance will extend the
life and efficiency of your wheelchair.
Safety Inspection Checklist
Follow these maintenance procedures for optimum performance of your
CGX
™
wheelchair:
1. Check to see that the wheelchair rolls straight.
2. Tyres: Check for flat spots, wear and proper inflation.
3. Wheel lock:
a.
Check to see that the locks engage easily.
b.
Check that the locks are free of wear
c.
Check to see that the locks do not interfere with the tyres when rolling.
4. Ensure that all fasteners are secure.
5. Castors: Inspect axle for proper tension. Spin the castor. The castor should spin
freely and come to a gradual stop.
Storage
The
CGX
™ folds down to a small unit and the rear wheels may be removed. We
suggest when storing the wheelchair, that it be stored in an indoor, cool and dry area.
Summary of Contents for CGX Extra Wide
Page 2: ......
Page 36: ...User Guide 11 5 2010 Part No 1536525 Issue 05...
