14
2. Plug the other end of the cable into a USB 3.0 port on the computer.
A USB 3.0 port on a computer is blue. It may also be ident
ified with “SS” or “3.0.”
Note:
If your computer does not support USB 3.0, then plug the cable into any available
USB 2.0 port on the computer. The unit will operate correctly; however, it will have
slower video performance.
3. For power, plug one end of the USB 2.0 cable (1 m or 2 m) into the USB 2.0 port on the
back of the unit. The port is identified by two raised dots.
4. Plug the other end of the cable into a USB port on the computer.
The Power LED on the rear of the unit displays as yellow, which indicates that the unit is
off. If it is not yellow, refer to
Power LED Description
on page 15 for more information.
5. Press the green
POWER
button
on the remote control to power the unit on.
The Power LED on the rear of the unit displays as green indicating that the unit is on. If
the LED is not green, refer to
Power LED Description
on page 15 for more information.
6. Make sure to power on your computer.
Summary of Contents for ONYX Portable HD
Page 6: ......
