FRANKLINWH aGate X Quick Installation Manual Download Page 2

                                                                                                QUICK INSTALLATION GUIDE (FHP)

 
 

 

©2022 FranklinWH Energy Storage Inc. All rights reserved

.

 

All  information  in  this  Manual  is  subject  to  the  copyright  and  other  intellectual  property  rights  of 
FranklinWH Energy Storage Inc. This manual may not be modified, copied or reproduced, in whole or 
in part, without the prior written permission of FranklinWH Energy Storage Inc.

 

Please visit 

www.franklinwh.com/support

 

for the latest Franklin Home Power documents.

 

All  brands  and  trademarks  mentioned  in  this  document  are  the  property  of  their  respective 
owners, and their use in this document does not imply the sponsorship or recognition of their 
products or services.   

Please  read  this  document  carefully  to  ensure  the  best  reliability  of  the  product  and  your 
warranty eligibility. For further information about warranty, please refer to

 

the

 Franklin Home 

Power Limited Warranty

.

 

This document is intended for use by professional installation and maintenance service providers 
only  and  no  statements,  information  or  recommendations  in  this  document  constitute  any 
express or implied warranty. 

 

Please  read  this  document  carefully  before  installing  or  using  the  Franklin  Home 
Power equipment.  Failure  to  follow any  instructions  or warnings  in this document 
may  result  in  damage  to  the  equipment,  personal  electric  shock,  severe  injury,  or 
even death. 

Product Information 

Franklin Home Power (FHP) is composed of aPower, aGate and other electrical components, and 
this document applies only to the following products: aPower X and aGate X. 

FranklinWH 

Energy Storage Inc.

 

(“FranklinWH”) reserves the right to make a

ny improvements to 

the  product,  and  the  contents  in  this  document  shall  be  subject  to  updates  without  further 
notification. 

All images and pictures provided in this Manual are only for demonstration purposes and may 
differ in detail from the product, based on the product version. 

Feedback

 

If you have any questions or give us advice, please send us an email at: 

[email protected]

 

Disposal of Scrapped Products

 

Scrapped  products  (including  their  internal  chemicals  and  electrical  materials)  should  not  be 
disposed  of  with  household  wastes.  Please  refer  to  your  local  laws  and  regulations  regarding 
disposal. 

 

Summary of Contents for aGate X























Reviews: