Franklin Fueling Systems TS-LS500, Installation Manual

Page: 29 / 40

25
Alarms
When a T5, EVO
TM
600, or EVO
TM
6000 console is in alarm, the Alarm LED on the front of the
console will flash. If the line has been programmed to shut down the pump on failed test (in the
FMS Setup), the pump will be unavailable for all system tests and dispensing until the line with
the active alarm is manually reset. If the condition still exists after reset, the alarm will return. A
service visit may be required to identify and correct the condition.
WARNING: Always REMOVE POWER from the console prior to installing/removing a module
or performing any maintenance while the console door is open.
NOTE:
Refer to the Important Safety Messages outlined in the beginning of this manual before
performing any console maintenance.
NOTE:
If this guide is not able to help you correct a Warning or Alarm, please contact FFS
Technical Services (1-800-984-6266).