Franklin Fueling Systems STP-SCIIIC, Installation Manual

Page: 9 / 16

9
Pole Stand Alone **Master-Slave Only **Master-Slave/AC **AC Only
1 On
Master Slave(s) Master Slave(s) Master Slave(s)
Off Off Off Off Off Off
2 Off
Master Slave(s) Master Slave(s) Master Slave(s)
On Off On Off Off Off
3 Off
Master Slave(s) Master Slave(s) Master Slave(s)
Off Off On Off On Off
4-5 See Table 3 See Table 3 See Table 3 See Table 3
6 See Table 4 See Table 4 See Table 4 See Table 4
7-8 N/A See Table 1 See Table 1 See Table 1
**See “Master-Slave/Alternating Circuit” section for definition, AC= Alternating Circuit
Table 2
Motor Horsepower Rating Selection Table
Motor Horsepower Rating Pole 4 Pole 5
¾
Off Off
1.5
Off On
3
On Off
5
On On
Table 3
Fault Readout Selection Table
Pole 6 Setting Description
Off Normal Operation
On With this mode selected, the controller will display the last 5
abnormal conditions it encountered.
The controller will beep once and then the red LED will flash the
most recent abnormal condition. It will then beep twice and the
red LED will flash the second to last abnormal condition. The
controller will follow this sequence through 5 beeps and then
repeat the sequence. It will continue to repeat the sequence
while in this mode. If there is less then 5 abnormal conditions the
controller will continue the beep sequence but the red LED will not
flash after the beep.
Table 4