5
Installation
Important Safety Messages
Franklin Fueling Systems equipment is designed to be used to pump volatile hydrocarbon liquids such as
gasoline and diesel fuel. Installing or working on this equipment means working in an environment in which
these highly flammable liquids are present.
This presents a risk of severe injury or death if these instructions
and standard industry practices are not followed. Read and follow this entire instruction booklet before
installing or working on this equipment.
As you read these instructions, watch for the following safety symbols:
WARNING
This symbol identifies a potentially hazardous situation which, if the instructions that follow
it are not adhered to, could result in death or serious bodily injury.
CAUTION
This symbol identifies a potentially hazardous situation which, if the instructions that
follow it are not adhered to, could result in serious property damage, including possible
environmental contamination as a result of the leakage of fuel from the equipment.
WARNING
Follow all federal, state, and local laws governing the installation of this product and its
associated systems. When no other regulations apply, follow NFPA codes 30, 30A, and 70
from the National Fire Protection Association. Failure to follow these codes could result in
severe injury, death, serious property damage and/or environmental contamination.
WARNING
Always disconnect both power supplies (240V Hook and the 415 input) before installing or
servicing. Be sure to use proper lock and tag out techniques to ensure no power is applied
accidentally. Failure to do so could result in severe injury or death.
Installer:
This instruction booklet MUST be left with the owner of the service station at which the equipment is
being installed.
Station Owner:
Retain these instructions for future use and provide them to persons servicing or removing this
equipment.
