18
11-03-2014 / LSC 044 / Rev. 00
18
Every 3 days
After turning off the machine, remove the shower heads using the wrench provided;
brush them carefully, making sure that all the holes are clean. Then reassemble the
parts following the sequence shown in the picture 6.
A. fastening screw
B. small shower head
C. large shower head
D. Diffuser
E. Delivery group
E
D
B
C
A
Fig. 6
Take note!
Do not use water jets to clean the machine.
Attention!
Every day, at the end of work and after daily cleaning, turn off the appliance using the electric switch; then close the water supply tap
and the gas tap (see pict.3- page.7)
WATER SOFTENER
If the installation of a water softener has been recommended by the installation engineer because of hard water and problems of scale
deposits, it is necessary to follow the instructions of the water softener’s manufacturer (periodic regeneration).
BODyWORK
clean the bodywork of the appliance using mild detergent to prevent any damage.
We recommend not to use abrasive sponges that could damage the body panels.
Summary of Contents for T 200
Page 4: ...2 11 03 2014 LSC 044 Rev 00 ...
Page 22: ...20 11 03 2014 LSC 044 Rev 00 ...
Page 23: ......
