background image

Pa
ge
6

Saf
ety
 inf
orm

ation

s

WARNING 
Danger from powder residue!

Irregular cleaning can cause powder residue to build up in the
machine, clog the outlets or get into the products. 

N

N

Clean Spectra I and the add-on units at least once a day.

N

Read the chapter “Cleaning and rinsing”!

WARNING 
Danger of burning!

Product service, hot water service become hot.

N

Do not touch the outlets. 

The bases of the cup warmer are hot.

N

Do not touch the bases!

WARNING
Danger of scalding!

During both automatic cleaning and manual cleaning, hot water
and steam will always be output. 

N

Keep away from the outlets whilst cleaning is in progress!

The products themselves are capable of causing scalding whilst
being served. 

N

Handle hot drinks with care!

CAUTION
Damage resulting from water jets!

The Spectra I is not protected from water jets. 

N

When cleaning,  avoid water jets or high-pressure cleaners.

N

Read the chapter “Cleaning and rinsing”!

CAUTION
Damage to the appliance!

N

Place appliance out of the reach of children.

N

Protect appliance from weather such as rain, frost or direct
sunshine.

The mains cable cause people to trip up, or can be damaged.

N

Never allow mains cable to dangle freely.

!

!

!

Summary of Contents for SPECTRA I











































Reviews: