Franke SMART GN 86 M H BK, Installation And User Manual

Page: 13 / 128

– 13 –
GN 86 M H XS / GN 86 M H BK / GN 86 M H WH
EN
Z X
Using or buttons, adjust the desired
end of cooking time. symbol will
disappear but symbol will be still
flashing on the screen. This indicates that
an automatic cooking is programmed but
cooking has not started yet.
Z X
After 6 seconds of the last button push
or by pressing , the adjustment
will be completed, the display shows
the current time of day.
Auto cooking end
After the automatic cooking has been
completed, symbol will be flashing on the
screen and the buzzer alarm will sound.
Any button press will stop the alarm sound but
the flashing symbol will go on till button
is pressed. The buzzer alarm will sound for
7 minutes if not stopped.
Power interrupts
„ „
After any interrupt of mains power, your
oven will be inactive after the power is
restored, for safety reasons.
„ „
After power on, the time of day digits
and symbol will flash and the
time of day has to be adjusted
(see power on).
Note: the flashing symbol indicates that
the oven is inactive and you have to enter the
manual mode.
Child lock
This function is intented to prevent any
unauthorized modification of the timer settings.
„ „
This function will be active, within
30 seconds after the last button press.
will appear.
„ „
To deactive it, press the button for
3 seconds. will disappear.
Programmable options
Alarm tone
„ „ Pressing and holding the button for
3 seconds will result in the currenly
valid buzzer tone being produced.
„ „ By pressing and buttons, you
may scroll through 3 available
buzzer tones.
„ „ The last heard buzzer tone will be
automatically recorded as the selected
tone.
„ „ After 6 seconds of the last button push
or by pressing , the adjustment
is completed.
Brightness setting
„ „
Pressing and holding the button for
3 seconds will result in the currenly
valid brightness setting being showed.
„ „
By pressing and buttons,
you may scroll through 8 available
brightness setting.
„ „
The last seen brightness setting will be
automatically recorded as the selected
setting.
„ „
After 6 seconds of the last
button press or by pressing ,
the adjustment is completed.
Note: Default settings are highest.
Note: Programmable options are nonvolatile
and will be resident after any power failure.